 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
 |
|
 |
|
HW SERIES The Infern-O-Therm HW-Series hot water storage systems are designed for heating and storing water for  concrete
manufacturing during the cold seasons. These systems are also useful
for applications where large volumes of heated water are required.
Infern-O-Therm Manufactured Burner, Model 400 Gas/ Oil Combination 2.7 million BTU input
Infern-O-Therm service department with burners ready for installation.
Standard Features of an Infern-O-Therm Model 400 Burner: INFERN-O-THERM BURNER MODEL 400: This is a heavy duty, industrial quality burner, designed and manufactured by I-O-T for the process industry. The design of the Infern-O-Therm burner causes the super heated air to travel down the length of the fire-tube in a spiral manner, “scrubbing” the entire wall of the fire-tube creating complete heat transfer with higher efficiency. * Natural gas, propane, and combination burners are optional. * Infern-O-Therm gas burners will burn either natural gas or propane with NO orifice change)
TO INCLUDE: Standard is #2 fuel oil with 2,800,000 BTU per hour input, MM-69 copper & brass low water burner safety control Honeywell automatic water temperature control, Honeywell high limit control with manual reset, Fireye Burner Management control system with indicating lights U.V. flame scanner with heat insulator & quartz lense union protector Alarm circuit with horn, Aluminum diamond plate weather-proof cover with hinged door. NEMA 12 weather tight control box 2 stage Webster fuel oil pump (one line or 2 line system) 20 Kv Ignition Transformer Dial Thermometer ( 50-350 deg F) 2 HP Blower motor “Totally Enclosed Fan Cooled” with 1.15 SF All components UL approved “Positive Proof Propane Pilot” (300 & 400 Burner) NO air linkage adjustments Solid steel construction (1/4” & 3/8” thick steel)
COMBUSTION CHAMBER: High temperature refractory with patented CLOVERLEAF super charger, which maintains the back pressure at approximately six inches water column and creates an actual forward combustion chamber. This causes a high efficiency burning process by properly atomizing the fuel vapor with the super heated air in the red hot chamber for complete combustion, lower fuel consumption and greater heat transfer. This is exclusive to Infern-O-Therm Corp. 30,000 gallon portable water heating system 5.6 million BTU input  The HW-Series offer a wide range of standard tank sizes from 3,000 gallons to 35,000 gallons. The highly efficient Infern-O-Therm combustion system provides extremely fast recovery rates--minimizing waiting times and optimizing on-the-job mixer availability. It also ensures optimum fuel burn rates--meeting your bottom line and environmental concerns. Efficient Combustion System 
The unique design of the HW-Series combustion system reduces heating costs up to 50% compared to other heating methods. It provides the precise, chemically-correct combination of fuel and air to heat water at the lowest possible cost. A patented, CLOVERLEAF super-charger within the combustion chamber refocuses air and fuel from the primary chamber to ensure combustion efficiencies over 90% HW-SERIES SPECIFICATIONS
Heat Transfer System Primary and secondary heat transfer tubes are designed to provide maximum fuel efficiency during the heating process. The combustion tube is fabricated from steel pipe for optimum heat transfer and minimum maintenance. Infern-O-Therm's unique sprinkling system offers a uniform distribution of water and integration of cold water into hot--eliminating costly cold spots. The HW hot water heating and storage systems by Infern-O-Therm offer a low-cost, highly efficient method of producing and storing large volumes of hot water for concrete manufacturing and other similar applications. For more information or a quotation, contact your local dealer or Infern-O-Therm today.  2000 gallon Econ-O-Hot tank, & 10,000 gallon HW Series hot water tank ready for delivery
HW-8-400 with Mounted Propane Pilot Tanks, 1200 gal Fuel Oil Tank & 2 Electrically Heated Water Discharge Pumps in Insulated Enclosures. Burner & Dual Pumps Pre-wired for 1 Power Electric Hookup
10 HP Water Discharge Pump & Water Inlet System Mounted & Pre-wired
for 1 Power Hook-up
7.5 HP water discharge pump with heated insulated weather proof cover
Water Pump Skid with Valving & Manifold 
Water Temperature Blending SystemThe Temperature Control System for hot and cold concrete production is the latest technology in highly accurate and responsive water temperature control. This system enables the user to select the exact water temperature needed. The system features the ability to react to temperature changes 4 times a second with a plus or minus 0.3% accuracy. The Temperature Control System helps to increase the efficiency of either your heating or cooling equipment. Blending in ambient water to achieve the exact temperature required, reducing the load on your heater or chiller. The Temperature Control System includes the following:
Infern-O-Therm manufactured Dual Burner Remote Temperature Controller & Blending Valve Control Panel "All-in-One"
10,000 gal. hot water tank with 35 ton chiller all mounted & pre-wired.
HW-20-400 with mounted 45-ton chiller
3 water discharge pumps & water inlet control system.
For the first time in the history of the concrete industry, a hot water heating system has been developed that successfully incorporates a waste oil-fired burner with a unique heat exchanger that enables you to use nearly any type of waste oil instead of #2 fuel oil to produce hot water. Designed for ease of maintenance as well as optimum performance, the waste oil-fired system is easily incorporated with the standard Infern-O-Therm hot water unit and chiller. Kits are also available for installation into existing units. Units available up to 1 million BTU input. Infern-O-Therm heating system for mobil mix
concrete trucks.
 Stainless Steel Water Heating System Complete with Fuel Tank, Water Discharge Pump & Hose Reel.
Model HW-7.5-200 with Mounted Fuel Tank, Water Pump & One Power Electric Hook-up
Infern-O-Therm uses Powerflame manufactured burners in large Econo-Hot systems.
30,000 gal. portable chiller unit with 80 ton chiller
RETRO-FIT STACK ECONOMIZER KIT (Patent pending)
Click on the link below to calculate what your actual fuel savings will be using the Infern-O-Therm Stack Pre-heater Economizer Stack Economizer Savings Calculator
Above combustion analysis was performed on a 2 million BTU Power Flame Burner. Bacharach Inc. is a world leader in the design, manufacture, and service of advanced test and measurement instrumentation. For over 100 years the Bacharach brand has served the HVAC/R industry with products made in the USA and designed for residential, commercial and industrial applications. The company’s extensive product line includes instruments that detect, measure and record combustion, refrigerant and environmental gases, temperature, humidity and other air quality and safety parameters. A full-line of refrigerant recovery equipment for residential, industrial and automotive applications further extends Bacharach’s family of products.
Preheats incoming water using exhaust flue gas, temperature increases of up to 32 degrees above incoming have been noted. Kit can be installed on new or existing units. This kit can increase unit efficiency to a "real" 96%.
Water discharge pump & economizer recirculation pump with water inlet control manifold. All mounted & pre-wired
Dual stack economizer recirculation pumps & chiller discharge pump. Click here to read an article about the IOT Stack Economizer
Infern-O-Therm Factory
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 HP & 5 HP Water Discharge Pump
15,000 gal Waste Oil Fired Tank
10,000 gal. Vertical Fuel Oil Tank
